Case 821E Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Case (See all Case Equipment for sale)
Model: 821E (See all Case 821E for sale)
Bucket
| Specs | 49 Specs |
| Breakout Force | 34,416 lbs (15,611 kg) |
| Bucket Capacity - heaped | 5 cu yd (3 cu m) |
| Bucket Capacity - struck | 4 cu yd (3 cu m) |
| Bucket Width | 10 ft (3 m) |
| Dump Clearance at Max Raise | 10 ft (3 m) |
Dimensions
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 11 ft (3 m) |
| Hinge Pin - Max Height | 14 ft (4 m) |
| Length with Bucket on Ground | 26 ft (8 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 10 ft (3 m) |
Engine
| Aspiration | Turbocharged and Aftercooled |
| Displacement | 411 cu in (6,735 cu cm) |
| Engine Model | Family IV, 667TA/EBD Tier III Certified |
| Gross Power | 210 hp (157 kw) |
| Make | Case |
| Model | Family IV 667TA/EED Tier 3 |
| Net Power | 198 hp (148 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1800 rpm |
| Torque Measured @ | 1400 rpm |
Hydraulic System
| Dump Time | 1.2 seconds |
| Lower Time | 2.8 seconds |
| Pump Flow Capacity | 32 gpm (120 lpm) |
| Pump Type | closed centered pressure/flow compensated |
| Raise Time | 5.6 seconds |
| Relief Valve Setting | 3600 psi |
Operating Specifications
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 111 gal (419 l) |
| Engine Oil Fluid Capacity | 6 gal (21 l) |
| Front Axle/Diff Fluid Capacity | 10 gal (37 l) |
| Fuel Capacity | 76 gal (288 l) |
| Hydraulic System Fluid Capacity | 46 gal (174 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 37,844 lbs (17,166 kg) |
| Rated Bucket Capacity | 4 cu yd (3 cu m) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 6 gal (24 l) |
| Static Tipping Weight | 31,376 lbs (14,232 kg) |
| Tire Size | 23.5 x 25 l2 bias |
| Transmission Fluid Capacity | 11 gal (40 l) |
| Turning Radius | 20 ft (6 m) |
Transmission
| Max Speed - Forward | 23 mph (37 kph) |
| Max Speed - Reverse | 16 mph (25 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R Proportional w/Electronic Control Module |
Weights
| Operational Weight | 37,844 lbs (17,166 kg) |
