Caterpillar 259D Compact Track Loader

Category: Compact Track Loaders (See all Compact Track Loaders for sale)

Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)

Model: 259D (See all Caterpillar 259D for sale)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Cab

FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008

Dimensions

Bucket Pin Height - Carry Position	7.8 in
Bucket Pin Height - Maximum Lift	10.1 ft
Bucket Pin Reach - Maximum Lift	9.4 in
Clearance at Max Lift and Dump	7.5 ft
Clearance at Maximum Lift and Dump	89.9 in
Departure Angle	35 deg
Dump Angle	52 deg
Ground Clearance	8.9 in
Height - Top of Cab	7 ft
Length - Track on Ground	59 in
Length - with Bucket	11.5 ft
Length - With Bucket on Ground	137.3 in
Length - without Bucket	9.1 ft
Length - without Bucket	108.9 in
Maximum Dump Angle	52 deg
Maximum Overall Height	154.1 in
Maximum Reach - With Arms Parallel to Ground	51.4 in
Overall height	12.9 ft
Overall Length - Track	78.7 in
Overall Track Length	6.6 ft
Rack Back Angle - Maximum Height	87 deg
Reach - Maximum Lift/Dump	23.9 in
Reach at Max Lift and Dump	2 ft
Turning Radius from Center - Bucket	86 in
Turning Radius from Center - Coupler	54.8 in
Turning Radius from Center - Machine Rear	61.5 in
Vehicle Width (320 mm/12.6 in tracks)	66 in
Vehicle Width (400 mm/15.7 in tracks)	69 in

Engine

Bore	3.7 in
Displacement	203 cu in
Engine Make	DIT
Engine Model	Cat C3.3B DIT (turbo)
Gross Power	74.3 hp
Gross Power - SAE J1995	74.3 hp
Net Power	73.2 hp
Net Power - ISO 9249	74.9 hp
Net Power - SAE 1349	73.2 hp
Peak Torque	195.5 lbs ft
Peak Torque - 1,500 rpm - SAE J1995	195 ft
Stroke	4.7 in
Torque Measured @	1500 rpm

Hydraulic System

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	58 hp
Hydraulic Flow - High Flow - Loader Hydraulic Flow	30 gpm
Hydraulic Flow - High Flow - Loader Hydraulic Pressure	3335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	39 hp
Hydraulic Flow - Standard - Loader Hydraulic Flow	20 gpm
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi
Pump Flow	20.1 gpm
Relief Valve Pressure	3335.9 psi

Loader

Boom breakout force	5035.4 lbs
Operating Load	2899.1 lbs
Operating Width	66 in
Rated Operating Capacities - 35% Tipping Load	5800.4 lbs

Noise Level

Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	103 dB(A)

Operating Specifications

Alternator Supplied Amperage	80 amps
Breakout Force - Tilt Cylinder	5035 lbs
Cooling System Fluid Capacity	3.7 gal
Engine Oil Capacity	3 gal
Fuel Capacity	27.8 gal
Ground Contact Area - With 320 mm/12.6 in Track	1483 cu in
Ground Contact Area - With 400 mm/15.7 in Track	1848 cu in
Ground Pressure - With 320 mm/12.6 in Track	6 psi
Ground Pressure - With 400 mm/15.7 in Track	4.8 psi
Hydraulic System Fluid Capacity	13.3 gal
Max Speed - high range	8.6 mph
Max Speed - low range	6 mph
Operating Voltage	12 volts
Operating Weight	8847.2 lbs
Rated Operating Capacities - 35% Tipping Load	2030 lbs
Rated Operating Capacities - 50% Tipping Load	2900 lbs
Rated Operating Capacity with Optional Counterweight	3100 lbs
Tipping Load	5800 lbs

Power Train

Travel Speed - Forward or Reverse - One Speed	5.9 mph
Travel Speed - Forward or Reverse - Two Speed	8.5 mph

Service Refill Capacities

Cooling system	3.7 gal
Engine Crankcase	3 gal
Fuel Tank	27.7 gal
Hydraulic System	13.2 gal
Hydraulic Tank	10.3 gal

Undercarriage

Ground Contact Area	1488.1 cu in
Ground Pressure	6 psi
Length of Track on Ground	11.5 ft

Weights

Operating Weight

8945 lbs