Caterpillar 289D Compact Track Loader

Category: Compact Track Loaders (See all Compact Track Loaders for sale)

Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)

Model: 289D (See all Caterpillar 289D for sale)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.

Cab

FOPS	ISO 3449:2005 Level I
FOPS Level II	ISO 3449:2005 Level II
ROPS	ISO 3471:2008

Dimensions

Bucket Pin Height - Carry Position	7.5 in
Bucket Pin Height - Maximum Lift	10.5 ft
Bucket Pin Reach - Maximum Lift	14.5 in
Clearance at Max Lift and Dump	7.9 ft
Clearance at Maximum Lift and Dump	94 in
Departure Angle	33 deg
Dump Angle	51 deg
Ground Clearance	8.9 in
Height - Top of Cab	7 ft
Length - Track on Ground	64.2 in
Length - with Bucket	12.2 ft
Length - With Bucket on Ground	146.2 in
Length - without Bucket	9.9 ft
Length - without Bucket	117.9 in
Maximum Dump Angle	51 deg
Maximum Overall Height	158.1 in
Maximum Reach - With Arms Parallel to Ground	50 in
Maximum Overall Height	13.2 ft
Overall Length - Track	83.8 in
Overall Track Length	7 ft
Rack Back Angle - Maximum Height	84 deg
Reach - Maximum Lift/Dump	30 in
Reach at Max Lift and Dump	2.5 ft
Turning Radius from Center - Bucket	88.8 in
Turning Radius from Center - Coupler	55.5 in
Turning Radius from Center - Machine Rear	70.8 in
Turning Radius from Center - Machine Rear	70.7 in
Vehicle Width (400 mm/15.7 in tracks)	76 in
Vehicle Width (450 mm/17.7 in tracks)	78 in
Width Over Tracks	6.4 ft

Engine

Bore	3.7 in
Displacement	203 cu in
Engine Make	DIT
Engine Model	Cat C3.3B DIT (turbo)
Gross Power	74.3 hp
Gross Power - SAE J1995	74.3 hp
Net Power	72.9 hp
Net Power - ISO 9249	73.7 hp
Net Power - SAE 1349	72.9 hp
Peak Torque	195.5 lbs ft
Peak Torque - 1,500 rpm - SAE J1995	195 ft
Stroke	4.7 in
Torque Measured @	1500 rpm

Hydraulic System

Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	76 hp
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	32 gpm
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	44 hp
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi
Pump Flow	22.8 gpm
Relief Valve Pressure	3335.9 psi

Loader

Breakout Force	7290.7 lbs
Operating Load Rating	2660 lbs
Operating Width	76 in
Tipping Load	7599.4 lbs

Noise Level

Inside Cab*	83 dB(A)
Note (1)	Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (3)	***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab**	103 dB(A)

Operating Specifications

Alternator Supplied Amperage	80 amps
Breakout Force - Tilt Cylinder	7291 lbs
Cooling System Fluid Capacity	3.7 gal
Fuel Capacity	24.9 gal
Ground Contact Area - With 400 mm/15.7 in Track	2015 cu in
Ground Contact Area - With 450 mm/17.7 in Track	2272 cu in
Ground Pressure - With 400 mm/15.7 in Track	5.2 psi
Ground Pressure - With 450 mm/17.7 in Track	4.6 psi
Hydraulic System Fluid Capacity	13.8 gal
Max Speed - high range	7.1 mph
Max Speed - low range	4.5 mph
Operating Voltage	12 volts
Operating Weight	10533.7 lbs
Rated Operating Capacities - 35% Tipping Load	2660 lbs
Rated Operating Capacities - 50% Tipping Load	3800 lbs
Rated Operating Capacity with Optional Counterweight	4050 lbs
Tipping Load	7600 lbs

Power Train

Travel Speed - Forward or Reverse - One Speed	4.5 mph
Travel Speed - Forward or Reverse - Two Speed	7 mph

Service Refill Capacities

Cooling system	3.7 gal
Engine Crankcase	3 gal
Fuel Tank	24.8 gal
Hydraulic System	13.7 gal
Hydraulic Tank	10.3 gal

Undercarriage

Ground Contact Area	2015.1 cu in
Ground Pressure	5.3 psi
Length of Track on Ground	5.4 ft

Weights

Operating Weight

10533 lbs