Caterpillar 299D3 XE LAND MANAGEMENT Compact Track Loader
Category: Compact Track Loaders (See all Compact Track Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 299D3 XE LAND MANAGEMENT (See all Caterpillar 299D3 XE LAND MANAGEMENT for sale)
AIR CONDITIONING SYSTEM (IF EQUIPPED)
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |
CAB
| FOPS | ISO 3449:2005 Level I |
| ROPS | ISO 3471:2008 |
DIMENSIONS
| Bucket Pin Height - Carry Position | 7.1 in |
| Bucket Pin Height - Maximum Lift | 126.3 in |
| Bucket Pin Reach - Maximum Lift | 19.4 in |
| Clearance at Maximum Lift and Dump | 94.5 in |
| Departure Angle | 33° |
| Ground Clearance | 9.6 in |
| Height - Top of Cab | 83.6 in |
| Length - Track on Ground | 69.6 in |
| Length - With Bucket on Ground | 154.7 in |
| Length - without Bucket | 125.5 in |
| Maximum Dump Angle | 54° |
| Maximum Overall Height | 158.7 in |
| Maximum Reach - With Arms Parallel to Ground | 51.9 in |
| Note | Operating Weight, Operating Specifications and Dimensions all based on ... |
| Overall Length - Track | 89.4 in |
| Rack Back Angle - Maximum Height | 81° |
| Reach - Maximum Lift/Dump | 33.6 in |
| Roll Back Angle | 25° |
| Turning Radius from Center - Bucket | 91.1 in |
| Turning Radius from Center - Coupler | 58.1 in |
| Turning Radius from Center - Machine Rear | 74 in |
| Vehicle Width (400 mm/15.7 in tracks) | 76 in |
| Vehicle Width (450 mm/17.7 in tracks) | 78 in |
ENGINE
| Bore | 3.9 in |
| Breakout Force - Lift Cylinder | 6162 lb |
| Breakout Force - Tilt Cylinder | 7270 lb |
| Displacement | 232 in³ |
| Engine Model | Cat C3.8 DIT (turbo) |
| Gross Power - SAE J1995 | 110 hp |
| Ground Contact Area - With 400 mm/15.7 in Track | 2171 in² |
| Ground Contact Area - With 450 mm/17.7 in Track | 2443 in² |
| Ground Pressure - With 400 mm/15.7 in Track | 5.9 psi |
| Ground Pressure - With 450 mm/17.7 in Track | 5.2 psi |
| Net Power | 106 hp |
| Net Power - ISO 9249 | 107 hp |
| Net Power - SAE 1349 | 106 hp |
| Note | Operating Weight, Operating Specifications and Dimensions all based on ... |
| Peak Torque - 1,500 rpm - SAE J1995 | 276 ft-lb |
| Rated Operating Capacities - 35% Tipping Load | 4340 lb |
| Rated Operating Capacities - 50% Tipping Load | 6200 lb |
| Stroke | 4.7 in |
| Tipping Load | 12400 lb |
HYDRAULIC SYSTEM
| Hydraulic Flow - XE - Hydraulic Power (calculated) | 94 hp |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Flow* | 40 gpm |
| Hydraulic Flow - XE - Maximum Loader Hydraulic Pressure | 4061 psi |
| Note | *When equipped with Cat 400 Series work tools. |
| Standard Flow Mode - Hydraulic Power - Calculated | 44 hp |
| Standard Flow Mode - Loader Hydraulic Flow | 23 gpm |
| Standard Flow Mode - Loader Hydraulic Pressure | 3335 psi |
NOISE LEVEL
| Inside Cab* | 83 dB(A) |
| Note (1) | Sealed and pressurized cab is standard in North America and Europe. |
| Note (2) | *The declared dynamic operator sound pressure levels per ISO 6396:2008. |
| Note (3) | **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
| Outside Cab** | 104 dB(A) |
POWER TRAIN
| Travel Speed - Forward or Reverse - One Speed | 5.5 mile/h |
| Travel Speed - Forward or Reverse - Two Speed | 8.3 mile/h |
SERVICE REFILL CAPACITIES
| Cooling system | 4.1 gal |
| Diesel Exhaust Fluid (DEF) Tank | 5 gal |
| Engine Crankcase | 3.5 gal |
| Fuel Tank | 58 gal |
| Hydraulic System | 14.5 gal |
| Hydraulic Tank | 10.3 gal |
WEIGHTS
| Note | Operating Weight, Operating Specifications and Dimensions all based on ... |
| Operating Weight | 12764 lb |
