Caterpillar 248B Skid Steer Loader
Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 248B (See all Caterpillar 248B for sale)
Cab
| Specs | 75 Specs |
| FOPS | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| FOPS Level II | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
| ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Dimensions
| Bucket Pin Height - Carry Position | 10 in (25 cm) |
| Bucket Pin Height - Maximum Lift | 10 ft (3 m) |
| Bumper Overhang - Rear Axle | 41 in (104 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 94 in (239 cm) |
| Ground Clearance | 9 in (23 cm) |
| Length - With Bucket on Ground | 138 in (351 cm) |
| Length - without Bucket | 110 in (279 cm) |
| Length w/o Bucket | 9 ft (3 m) |
| Length with Bucket | 12 ft (4 m) |
| Maximum Overall Height | 156 in (396 cm) |
| Maximum Reach - With Arms Parallel | 53 in (135 cm) |
| Reach - Maximum Lift/Dump | 21 in (53 cm) |
| Reach at Max Lift and Dump | 21 in (54 cm) |
| Turn Radius from Center - Bucket | 83 in (211 cm) |
| Turn Radius from Center - Coupler | 64 in (163 cm) |
| Turn Radius from Center - Rear | 64 in (163 cm) |
| Turning Radius from Center - inc bucket | 83 in (210 cm) |
| Turning Radius from Center - Machine Rear | 64 in (162 cm) |
| Vehicle Width over Tires | 66 in (168 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
| Width Over Tires | 6 ft (2 m) |
Engine
| Aspiration | turbocharged |
| Bore | 4 in (9 cm) |
| Engine Make | Caterpillar |
| Engine Model | Cat 3044C DIT |
| Engine Power - ISO 14396 | 80 hp (60 kw) |
| Gross Power | 77 hp (57 kw) |
| Gross Power - SAE J1995 | 82 hp (61 kw) |
| Net Flywheel Power | 76 hp (57 kw) |
| Net Power - EEC 80/1269 | 77 hp (57 kw) |
| Net Power - ISO 9249 EEC | 77 hp (57 kw) |
| Net Power - SAE 1349 | 76 hp (57 kw) |
| Stroke | 5 in (12 cm) |
Hydraulic System
| Hydraulic Flow | High Flow XPS |
| Hydraulic Power | 78 hp (58 kw) |
| Loader Hydraulic Flow | 33 gpm (125 lpm) |
| Loader Hydraulic Pressure | 4061.06 psi |
| Maximum Loader Hydraulic Flow | 33 gpm (125 lpm) |
| Maximum Loader Hydraulic Pressure | 4060 psi |
| Pump Flow Capacity | 33 gpm (125 lpm) |
| Relief Valve Pressure | 4061.1 psi |
Loader
| Breakout Force | 5482.9 psi |
| Operating Load Rating | 2,000 lbs (907 kg) |
| Tipping Angle | 3999.2 degrees |
Operating Specifications
| Alternator Supplied Amperage | 90 amps |
| Breakout Force - Lift Cylinder | 4,592 lbs (2,083 kg) |
| Breakout Force - Tilt Cylinder | 5,484 lbs (2,488 kg) |
| Chain Box Fluid Capacity - each side | 2 gal (7 l) |
| Cooling System Fluid Capacity | 3 gal (10 l) |
| Engine Oil Fluid Capacity | 3 gal (10 l) |
| Fuel Capacity | 24 gal (90 l) |
| Hydraulic System Fluid Capacity | 14 gal (52 l) |
| Max Speed | 8 mph (13 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 7,319 lbs (3,320 kg) |
| Rated Operating Capacity | 2,000 lbs (907 kg) |
| Rated Operating Capacity with Optional Counterweight | 2,100 lbs (953 kg) |
| Tipping Load | 4,188 lbs (1,900 kg) |
| Tire Size | 12x16.5 10PR |
Power Train
| Travel Speed Forward | 8 mph (12 kph) |
| Travel Speed Forward - 2-Speed Option | 12 mph (19 kph) |
| Travel Speed Reverse | 8 mph (12 kph) |
| Travel Speed Reverse - 2-Speed Option | 12 mph (19 kph) |
Service Refill Capacities
| Chain Box - Each Side | 2 gal (7 l) |
| Cooling system | 3 gal (10 l) |
| Engine Crankcase | 3 gal (10 l) |
| Fuel Tank | 24 gal (90 l) |
| Hydraulic System | 14 gal (52 l) |
| Hydraulic Tank | 9 gal (35 l) |
Weights
| Operating Weight | 7,321 lbs (3,321 kg) |
