Caterpillar 262D Skid Steer Loader
Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 262D (See all Caterpillar 262D for sale)
Air Conditioning System
| Specs | 71 Specs |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
Cab
| FOPS | ISO 3449:2005 Level I |
| FOPS Level II | ISO 3449:2005 Level II |
| ROPS | ISO 3471:2008 |
Dimensions
| Bucket Pin Height - Carry Position | 8 in (20 cm) |
| Bucket Pin Height - Maximum Lift | 11 ft (3 m) |
| Bucket Pin Reach - Maximum Lift | 16 in (39 cm) |
| Bumper Overhang - Rear Axle | 43 in (108 cm) |
| Clearance at Max Lift and Dump | 8 ft (2 m) |
| Clearance at Maximum Lift and Dump | 94 in (238 cm) |
| Departure Angle | 26 degrees |
| Ground Clearance | 9 in (23 cm) |
| Height - Top of Cab | 7 ft (2 m) |
| Hinge pin height - fully raised | 125 in (317 cm) |
| Length - With Bucket on Ground | 146 in (371 cm) |
| Length - without Bucket | 118 in (299 cm) |
| Length w/o Bucket | 10 ft (3 m) |
| Length with Bucket | 12 ft (4 m) |
| Maximum Dump Angle | 51 degrees |
| Maximum Overall Height | 158 in (401 cm) |
| Maximum Reach - With Arms Parallel | 51 in (129 cm) |
| Rack Back Angle - Maximum Height | 84 degrees |
| Reach - Maximum Lift/Dump | 31 in (78 cm) |
| Reach at Max Lift and Dump | 31 in (79 cm) |
| Turn Radius from Center - Bucket | 86 in (218 cm) |
| Turn Radius from Center - Coupler | 55 in (140 cm) |
| Turn Radius from Center - Rear | 71 in (181 cm) |
| Turning Radius from Center - inc bucket | 86 in (218 cm) |
| Turning Radius from Center - Machine Rear | 71 in (181 cm) |
| Vehicle Width over Tires | 66 in (168 cm) |
| Wheel Base | 4 ft (1 m) |
| Wheelbase | 4 ft (1 m) |
Engine
| Bore | 4 in (9 cm) |
| Displacement | 203 cu in (3,327 cu cm) |
| Engine Model | Cat C3.3B DIT (Turbo) |
| Gross Power - SAE J1995 | 74 hp (55 kw) |
| Max Torque | 196 lbs ft (265 nm) |
| Net Flywheel Power | 73 hp (54 kw) |
| Net Power - ISO 9249 EEC | 74 hp (55 kw) |
| Net Power - SAE 1349 | 73 hp (54 kw) |
| Stroke | 5 in (12 cm) |
| Torque Measured @ | 1500 rpm |
Hydraulic System
| Hydraulic Flow (1) | Standard |
| Hydraulic Flow (2) | High Flow XPS |
| Pump Flow Capacity | 32 gpm (121 lpm) |
Loader
| Operating Load Rating | 2,700 lbs (1,225 kg) |
| Operating Width | 66 in (168 cm) |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Breakout Force - Tilt Cylinder | 7,355 lbs (3,336 kg) |
| Chain Box Fluid Capacity - each side | 3 gal (13 l) |
| Cooling System Fluid Capacity | 4 gal (14 l) |
| Fuel Capacity | 25 gal (94 l) |
| Hydraulic System Fluid Capacity | 14 gal (52 l) |
| Max Speed | 8 mph (12 kph) |
| Operating Voltage | 12 volts |
| Operational Weight | 8,012 lbs (3,634 kg) |
| Rated Operating Capacity | 2,700 lbs (1,225 kg) |
| Rated Operating Capacity with Optional Counterweight | 2,950 lbs (1,338 kg) |
| Tipping Load | 5,400 lbs (2,449 kg) |
| Tire Size | 12 × 16.5 |
Power Train
| Travel Speed Forward | 8 mph (12 kph) |
| Travel Speed Forward - 2-Speed Option | 11 mph (18 kph) |
| Travel Speed Reverse | 8 mph (12 kph) |
| Travel Speed Reverse - 2-Speed Option | 11 mph (18 kph) |
Service Refill Capacities
| Chain Box - Each Side | 3 gal (12 l) |
| Cooling system | 4 gal (14 l) |
| Engine Crankcase | 3 gal (11 l) |
| Fuel Tank | 25 gal (94 l) |
| Hydraulic System | 14 gal (52 l) |
| Hydraulic Tank | 10 gal (39 l) |
Weights
| Operating Weight | 8,011 lbs (3,634 kg) |
