Case 721C XT Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Case (See all Case Equipment for sale)
Model: 721C XT (See all Case 721C XT for sale)
Bucket
| Specs | 46 Specs |
| Breakout Force | 28,097 lbs (12,745 kg) |
| Bucket Capacity - heaped | 3 cu yd (2 cu m) |
| Bucket Capacity - struck | 2 cu yd (2 cu m) |
| Bucket Width | 9 ft (3 m) |
| Dump Clearance at Max Raise | 10 ft (3 m) |
Dimensions
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 11 ft (3 m) |
| Hinge Pin - Max Height | 13 ft (4 m) |
| Length with Bucket on Ground | 24 ft (7 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 10 ft (3 m) |
| Width Over Tires | 8 ft (3 m) |
Engine
| Aspiration | turbocharged |
| Displacement | 504 cu in (8,259 cu cm) |
| Engine Model | 6T-830 |
| Gross Power | 165 hp (123 kw) |
| Net Power | 152 hp (113 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2200 rpm |
| Torque Measured @ | 1300 rpm |
| Torque Rise | 41% |
Hydraulic System
| Dump Time | 2 seconds |
| Lower Time | 4.6 seconds |
| Pump Flow Capacity | 19 gpm (70 lpm) |
| Pump Type | dual, vane-type tandem |
| Raise Time | 5.4 seconds |
| Relief Valve Setting | 2775 psi |
Operating Specifications
| Alternator Supplied Amperage | 65 amps |
| Cooling System Fluid Capacity | 9 gal (33 l) |
| Engine Oil Fluid Capacity | 6 gal (21 l) |
| Front Axle/Diff Fluid Capacity | 7 gal (27 l) |
| Fuel Capacity | 54 gal (204 l) |
| Hydraulic System Fluid Capacity | 41 gal (153 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 29,856 lbs (13,542 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 6 gal (21 l) |
| Static Tipping Weight | 21,751 lbs (9,866 kg) |
| Tire Size | 20.5-25 L3 |
| Transmission Fluid Capacity | 3 gal (12 l) |
| Turning Radius | 17 ft (5 m) |
Transmission
| Max Speed - Forward | 24 mph (39 kph) |
| Max Speed - Reverse | 17 mph (28 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation |
