Case 821C Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Case (See all Case Equipment for sale)
Model: 821C (See all Case 821C for sale)
Bucket
| Specs | 46 Specs |
| Breakout Force | 36,391 lbs (16,507 kg) |
| Bucket Capacity - heaped | 4 cu yd (3 cu m) |
| Bucket Capacity - struck | 3 cu yd (2 cu m) |
| Bucket Width | 9 ft (3 m) |
| Dump Clearance at Max Raise | 10 ft (3 m) |
Dimensions
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 11 ft (3 m) |
| Hinge Pin - Max Height | 13 ft (4 m) |
| Length with Bucket on Ground | 25 ft (7 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Aspiration | turbocharged and air to air cooled |
| Displacement | 504 cu in (8,259 cu cm) |
| Engine Model | 6TAA-8304 |
| Gross Power | 204 hp (152 kw) |
| Net Power | 186 hp (139 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1400 rpm |
| Torque Rise | 51% |
Hydraulic System
| Dump Time | 1.6 seconds |
| Lower Time | 4.3 seconds |
| Pump Flow Capacity | 50 gpm (189 lpm) |
| Pump Type | dual, vane-type tandem |
| Raise Time | 5.9 seconds |
| Relief Valve Setting | 2813.8 psi |
Operating Specifications
| Alternator Supplied Amperage | 65 amps |
| Cooling System Fluid Capacity | 9 gal (32 l) |
| Engine Oil Fluid Capacity | 6 gal (21 l) |
| Front Axle/Diff Fluid Capacity | 9 gal (33 l) |
| Fuel Capacity | 71 gal (268 l) |
| Hydraulic System Fluid Capacity | 46 gal (174 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 37,901 lbs (17,192 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 7 gal (27 l) |
| Static Tipping Weight | 30,082 lbs (13,645 kg) |
| Tire Size | 23.5-25 L3 |
| Transmission Fluid Capacity | 3 gal (12 l) |
| Turning Radius | 19 ft (6 m) |
Transmission
| Max Speed - Forward | 24 mph (38 kph) |
| Max Speed - Reverse | 17 mph (27 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation |
