Case 921C Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Case (See all Case Equipment for sale)
Model: 921C (See all Case 921C for sale)
Bucket
| Specs | 46 Specs |
| Breakout Force | 50,275 lbs (22,804 kg) |
| Bucket Capacity - heaped | 5 cu yd (4 cu m) |
| Bucket Capacity - struck | 4 cu yd (3 cu m) |
| Bucket Width | 10 ft (3 m) |
| Dump Clearance at Max Raise | 10 ft (3 m) |
Dimensions
| Ground Clearance | 2 ft (0 m) |
| Height - Top of Cab | 12 ft (4 m) |
| Hinge Pin - Max Height | 14 ft (4 m) |
| Length with Bucket on Ground | 28 ft (9 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 10 ft (3 m) |
Engine
| Aspiration | turbocharged and air to air cooled |
| Displacement | 661 cu in (10,832 cu cm) |
| Engine Model | QSMII |
| Gross Power | 270 hp (201 kw) |
| Net Power | 248 hp (185 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 1300 rpm |
| Net Torque Rise | 41% |
Hydraulic System
| Dump Time | 1.5 seconds |
| Lower Time | 4.9 seconds |
| Pump Flow Capacity | 38 gpm (144 lpm) |
| Pump Type | dual, vane-type tandem |
| Raise Time | 6.2 seconds |
| Relief Valve Setting | 2850 psi |
Operating Specifications
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 13 gal (47 l) |
| Engine Oil Fluid Capacity | 10 gal (37 l) |
| Front Axle/Diff Fluid Capacity | 17 gal (64 l) |
| Fuel Capacity | 104 gal (394 l) |
| Hydraulic System Fluid Capacity | 62 gal (233 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 50,621 lbs (22,961 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 17 gal (64 l) |
| Static Tipping Weight | 43,306 lbs (19,643 kg) |
| Tire Size | 26.5x25 L3 |
| Transmission Fluid Capacity | 8 gal (29 l) |
| Turning Radius | 20 ft (6 m) |
Transmission
| Max Speed - Forward | 24 mph (39 kph) |
| Max Speed - Reverse | 17 mph (27 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation |
