Clark 125C Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Clark (See all Clark Equipment for sale)
Model: 125C (See all Clark 125C for sale)
Bucket
| Specs | 44 Specs |
| Breakout Force | 39,265 lbs (17,810 kg) |
| Bucket Capacity - heaped | 5 cu yd (3 cu m) |
| Bucket Capacity - struck | 4 cu yd (3 cu m) |
| Bucket Width | 10 ft (3 m) |
| Dump Clearance at Max Raise | 10 ft (3 m) |
Dimensions
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 11 ft (3 m) |
| Hinge Pin - Max Height | 13 ft (4 m) |
| Length with Bucket on Ground | 27 ft (8 m) |
| Reach at Max Lift and Dump | 4 ft (1 m) |
| Wheelbase | 11 ft (3 m) |
| Width Over Tires | 9 ft (3 m) |
Engine
| Displacement | 611 cu in (10,013 cu cm) |
| Engine Model | LT-10-225 HT |
| Gross Power | 227 hp (169 kw) |
| Net Power | 215 hp (160 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1300 rpm |
Hydraulic System
| Dump Time | 1.4 seconds |
| Lower Time | 3.2 seconds |
| Pump Flow Capacity | 91 gpm (343 lpm) |
| Pump Type | tandem gear type |
| Raise Time | 7.4 seconds |
| Relief Valve Setting | 2755.8 psi |
Operating Specifications
| Alternator Supplied Amperage | 100 amps |
| Cooling System Fluid Capacity | 15 gal (57 l) |
| Engine Oil Fluid Capacity | 9 gal (34 l) |
| Front Axle/Diff Fluid Capacity | 9 gal (34 l) |
| Fuel Capacity | 75 gal (284 l) |
| Hydraulic System Fluid Capacity | 76 gal (288 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 43,475 lbs (19,720 kg) |
| Rear axle - Oscillation | 18.5 degrees |
| Rear Axle/Diff Fluid Capacity | 9 gal (34 l) |
| Static Tipping Weight | 32,320 lbs (14,660 kg) |
| Tire Size | 23.5-25 |
| Transmission Fluid Capacity | 11 gal (40 l) |
| Turning Radius | 25 ft (7 m) |
Transmission
| Max Speed - Forward | 19 mph (31 kph) |
| Max Speed - Reverse | 19 mph (31 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 4 |
| Transmission Type | Clark countershaft powershift |
