Liebherr L542 2plus1 Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Liebherr (See all Liebherr Equipment for sale)
Model: L542 2PLUS1 (See all Liebherr L542 2PLUS1 for sale)
Bucket
| Specs | 37 Specs |
| Bucket Capacity - heaped | 4 cu yd (3 cu m) |
| Bucket Width | 8 ft (3 m) |
| Dump Clearance at Max Raise | 9 ft (3 m) |
Dimensions
| Ground Clearance | 2 ft (1 m) |
| Height - Top of Cab | 11 ft (3 m) |
| Hinge Pin - Max Height | 13 ft (4 m) |
| Length with Bucket on Ground | 24 ft (7 m) |
| Wheelbase | 10 ft (3 m) |
Engine
| Aspiration | turbo-charged |
| Displacement | 388 cu in (6,361 cu cm) |
| Engine Model | D 934 S AG |
| Gross Power | 141 hp (105 kw) |
| Number of Cylinders | 4 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1300 rpm |
Hydraulic System
| Dump Time | 1.6 seconds |
| Lower Time | 4 seconds |
| Pump Flow Capacity | 37 gpm (140 lpm) |
| Pump Type | Load-sensing variable axial piston pump with output and flow control, and pressure cut-off in the control block |
| Raise Time | 5.9 seconds |
| Relief Valve Setting | 4786.3 psi |
Operating Specifications
| Alternator Supplied Amperage | 80 amps |
| Engine Oil Fluid Capacity | 8 gal (29 l) |
| Front Axle/Diff Fluid Capacity | 4 gal (17 l) |
| Fuel Capacity | 45 gal (170 l) |
| Hydraulic System Fluid Capacity | 48 gal (180 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 28,750 lbs (13,041 kg) |
| Rear Axle Oscillation | 12 degrees |
| Rear Axle/Diff Fluid Capacity | 4 gal (15 l) |
| Static Tipping Weight | 21,525 lbs (9,764 kg) |
| Tire Size | 20.5R25 |
Transmission
| Max Speed - Forward | 25 mph (40 kph) |
| Max Speed - Reverse | 25 mph (40 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 3 |
| Transmission Type | hydrostatic |
