Mecalac AF 1050 Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Mecalac (See all Mecalac Equipment for sale)
Model: AF 1050 (See all Mecalac AF 1050 for sale)
Bucket
| Specs | 33 Specs |
| Breakout Force | 4900 newton |
| Bucket Capacity - heaped | 2 cu yd (2 cu m) |
| Dumping angle, top | 45 degrees |
| Lifting force | 5400 newton |
| Payload on forks, max. turned, frontal | 5,512 lbs (2,500 kg) |
| Thrust force | 4650 newton |
| Tipping load Standard bucket | 8,378 lbs (3,800 kg) |
Dimensions
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 9 ft (3 m) |
| Hinge Pin - Max Height | 12 ft (4 m) |
| Length with Bucket on Ground | 20 ft (6 m) |
| Reach at Max Lift and Dump | 3 ft (1 m) |
| Wheelbase | 7 ft (2 m) |
| Width Over Tires | 7 ft (2 m) |
Engine
| Aspiration | Low-noise, water-cooled, turbo diesel engine |
| Battery | 95 Ah |
| Engine Model | Deutz TD 2.9 L4 |
| Net Power | 75 hp (56 kw) |
| Power Measured @ | 2600 rpm |
| Torque Measured @ | 1600 rpm |
Hydraulic System
| Pump Flow Capacity | 22 gpm (84 lpm) |
| Pump Type | Single circuit hydraulics with central gear pump |
Operating Specifications
| Front Axle/Diff Fluid Capacity | Turning Radius |
| Fuel Capacity | 34 gal (130 l) |
| Hydraulic System Fluid Capacity | 35 gal (134 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 12,787 lbs (5,800 kg) |
| Rear Axle Oscillation | 10 degrees |
| Rear Axle/Diff Fluid Capacity | 3 gal (12 l) |
| Steering Angle | 35 degrees |
| Tire Size | 14.5-20 |
| Turning Radius | 12 ft (4 m) |
Transmission
| Max Speed - Forward | 13 mph (20 kph) |
