Mecalac AX 850 Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Mecalac (See all Mecalac Equipment for sale)
Model: AX 850 (See all Mecalac AX 850 for sale)
Bucket
| Specs | 34 Specs |
| Breakout Force | 4200 newton |
| Bucket Capacity - heaped | 2 cu yd (2 cu m) |
| Dumping angle, top | 45 degrees |
| Lifting force | 4300 newton |
| Payload on forks, max. turned, frontal | 5,181 lbs (2,350 kg) |
| Thrust force | 3800 newton |
| Tipping load Standard bucket | 8,157 lbs (3,700 kg) |
Dimensions
| Ground Clearance | 1 ft (0 m) |
| Height - Top of Cab | 8 ft (2 m) |
| Hinge Pin - Max Height | 11 ft (3 m) |
| Length with Bucket on Ground | 17 ft (5 m) |
| Reach at Max Lift and Dump | 3 ft (1 m) |
| Wheelbase | 7 ft (2 m) |
| Width Over Tires | 6 ft (2 m) |
Engine
| Aspiration | Low-noise, water-cooled, turbo diesel engine |
| Battery | 100 Ah |
| Engine Model | Deutz TD 2.9 L4 |
| Net Power | 68 hp (51 kw) |
| Power Measured @ | 2300 rpm |
| Torque Measured @ | 1800 rpm |
Hydraulic System
| Pump Flow Capacity | 16 gpm (62 lpm) |
| Pump Type | Single circuit hydraulics with central gear pump |
Operating Specifications
| Alternator Supplied Amperage | 95 amps |
| Front Axle/Diff Fluid Capacity | 2 gal (6 l) |
| Fuel Capacity | 23 gal (87 l) |
| Hydraulic System Fluid Capacity | 16 gal (60 l) |
| Operating Voltage | 12 volts |
| Operating Weight | 11,133 lbs (5,050 kg) |
| Rear Axle Oscillation | 11 degrees |
| Rear Axle/Diff Fluid Capacity | 2 gal (7 l) |
| Steering Angle | 40 degrees |
| Tire Size | 12.5-18 |
| Turning Radius | 12 ft (4 m) |
Transmission
| Max Speed - Forward | 13 mph (20 kph) |
