Volvo L350H Wheel Loader
Category: Wheel Loaders (See all Wheel Loaders for sale)
Manufacturer: Volvo (See all Volvo Equipment for sale)
Model: L350H (See all Volvo L350H for sale)
Axles
| Specs | 43 Specs |
| Axle oil front | 41 gal (155 l) |
| Axle oil rear | 41 gal (155 l) |
| Front | Volvo AHW 90 |
| Rear | Volvo AHW 90 |
| Rear Axle Oscillation | 12 degrees |
Bucket
| Breakout Force | 100,152 lbs (45,428 kg) |
| Bucket Width | 13 ft (4 m) |
| Dump Clearance at Max Raise | 12 ft (4 m) |
Dimensions
| Ground Clearance | 2 ft (1 m) |
| Height - Top of Cab | 14 ft (4 m) |
| Hinge Pin - Max Height | 18 ft (5 m) |
| Length with Bucket on Ground | 37 ft (11 m) |
| Reach at Max Lift and Dump | 6 ft (2 m) |
| Wheelbase | 14 ft (4 m) |
| Width Over Tires | 12 ft (4 m) |
Drive System
| Torque multiplication, stall ratio | 2.65 |
| Transmission | Volvo HTE 400 |
| Transport speed, maximum | 24 mph (38 kph) |
Electrical System
| Alternator rating | 2280/80 (W/A) |
| Aux Battery Capacity | 2 x 170 Ah |
| Cold cranking capacity | 1000 A |
| Starter motor output | 9 hp (7 kw) |
| Voltage | 24 V |
Engine
| Aspiration | VGT (Variable Geometry Turbocharged) |
| Displacement | 983 cu in (16,100 cu cm) |
| Engine Model | Volvo D16J |
| Gross Power | 532 hp (397 kw) |
| Model | D16J |
| Net Power | 528 hp (394 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 1700 rpm |
| Torque Measured @ | 1400 rpm |
Hydraulic cycle times (unloaded)
| Lift | 8 seconds |
| Lower | 4.7 seconds |
| Tilt | 1.9 seconds |
| Total cycle time | 14.6 seconds |
Hydraulic System
| Engine speed | 1800 rpm |
| Working pressure | Pump 1 - 25 MPa, Pump 2 - 26 MPa, Pump 3 - 26 MPa |
Operating Specifications
| Cooling System Fluid Capacity | 18 gal (68 l) |
| DEF tank capacity | 14 gal (53 l) |
| Engine Oil Fluid Capacity | 15 gal (55 l) |
| Fuel Capacity | 154 gal (581 l) |
| Hydraulic System Fluid Capacity | 97 gal (365 l) |
| Rated Bucket Capacity | 9-17 cu yd (7-13 cu m) |
| Transmission Fluid Capacity | 21 gal (79 l) |
Steering System
| Articulation angle | 37 degrees |
| Cylinder bore | 4 in (11 cm) |
| Maximum flow | 90 gpm (340 lpm) |
| Rod Diameter | 3 in (7 cm) |
| Steering cylinders | 2 |
| Stroke | 2 ft (1 m) |
| Working pressure | 26 MPa, 260 bar |
Weights
| Operational Weight | 116,460 lbs (52,825 kg) |
