Tank Cleaning For Water Trucks

Tank Cleaning For Water Trucks

Meta Description: Meta Description: Learn the step-by-step process for thorough cleaning and disinfection of water truck storage tanks, hoses, and components. Discover the importance of tank cleaning for water trucks and get answers to frequently asked questions.

Cleaning the water tank trucks properly is essential to ensure safe water delivery. This guide will walk you through the step-by-step process to thoroughly clean and disinfect your water truck’s storage tank, hoses, and other components.

Learning the correct cleaning procedure to eliminate impurities and microbes that could otherwise contaminate the water supply during transport. Following these best practices will also help maintain your equipment between uses.

Key Takeaways:

• Properly determine water type (potable vs non-potable) and select the right tank based on prior contents to transport water safely.
• Thoroughly prepare by emptying and cleaning tanks, hoses, and pumps with the correct cleaning solution and equipment.
• Follow the cleaning process by scrubbing tank interiors and running the detergent mixture through hoses to remove impurities.
• Ensure disinfection by chlorinating tanks and hoses before a final rinse with clean water. Prepare equipment for next use.

Why Cleaning Water Trucks is Important?

Cleaning water trucks regularly is crucial to ensure high-quality, clean water delivery. Using the proper cleaning solution, process, and equipment, like a high-pressure jet or stiff brush, helps remove impurities from the tank, hoses, and pump.

This eliminates problems like chemicals, chlorine, bacteria, and other microbes from contaminating the water supply and areas where the water is transported.

Determining Water Type and Tank

When cleaning water trucks, it’s important to determine the type of water and select the proper tank.

Potable vs Non-Potable Water

• Potable water that is transported must be in a clean tank, hoses, and pump free of chemicals and chlorine to ensure the quality and safety of the water for human consumption.
• Non-potable water doesn’t require as thorough cleaning but still needs disinfecting to prevent problems for its intended use.

Selecting the Right Tank

• Choose a tank that has only held clean water previously if transporting potable water to avoid contamination.
• Consider tanks of appropriate size that can hold the required amount of water for the job.
• Don’t use a tank that once carried milk or other liquids without thorough cleaning and disinfecting with the proper solution.

Preparation

Proper preparation is key before starting to clean water trucks.

Emptying the Tank

• Empty the tank to be cleaned by opening valves and outlets to drain all water, chemicals, and residue.
• Remove any tools like hoses stored inside so they can also be cleaned.

Gathering Cleaning Supplies

• Collect all necessary equipment for cleaning, including a high-pressure jet, stiff brush, hot water, cleaning solution, and disinfectant.
• Have a mixture of detergent and hot water ready to thoroughly clean tank interiors, hoses, and pumps.
• Gather chlorine or other disinfectants to fill tanks and disinfect all parts afterward.

Cleaning Process

The cleaning process involves thoroughly cleaning the tank interior, hoses, pumps and using the proper cleaning solution.

• Cleaning the Tank Interior: A mixture of detergent and hot water is applied to scrub the tank’s internal surfaces with a stiff brush or high-pressure jet to remove any residue or chemicals left inside.
• Cleaning Hoses and Pumps: Hoses and pumps that may have collected debris from prior uses are cleaned by running the hot water and detergent mixture through them.
• Using Detergent and Hot Water: When applied with equipment like a stiff brush or high-pressure jet, cleaning detergent with hot water helps dissolve and flush dirt and buildup from the tank, hoses, and pumps. Running the mixture through the hoses also cleans the inner surfaces.

Disinfection

• Disinfecting the tank is an important step to ensure clean water transport.
• Chlorine is added to fill the tank partially with clean water to disinfect and kill bacteria and microbes.
• The disinfectant mixture is then run through hoses for an hour by pumping or filling one end to clean inner surfaces.

Rinsing and Completion

• Tanks are thoroughly rinsed with clean water until all chlorine residue is removed.
• Water is then filled and left to sit before emptying to check for any remaining chemicals.
• Rinsing ensures the tank interior is clean and ready for the next load of potable water.